Spartan Armor Sentinel Plate Carrier Level III

  

SPARTAN ARMOR SENTINEL PLATE CARRIER LEVEL III. Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization.

Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs. Fitting 38" to 48" chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates.

Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection.

Adjustable from 38" To 48" Chest Size. Anti-slip Shoulder Padding With Velcro. Side Release Buckles On The Internal Waist Strap. Padded Mesh Separators For The Interior Of The Carrier For Breathability. Fits 10" X 12" Shooters Cut Plates.

Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor. Velcro In Front Of The Carrier Is 8" X 4" With A Velcro Loop On Each Side. Velcro On The Back Of The Carrier Measures 9" X 3". Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time.

NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.

AR550 BODY ARMOR SET OF TWO. Has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory.

Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. Is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated. "Level III+" indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips).

While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems. AR550 Single Curve Full Coat Plates as "Level III" even though they are capable of providing the operator with a higher degree of ballistic protection. Our AR550 armor hits the "sweet spot" in the Brinell Hardness (BHN) range.

With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it's much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process. Laser Cut to Protect Ballistic Integrity.

All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 °C / 45,000 °F) to a wide portion of the steel plate, Spartan Armor Systems.

Only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. We maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.

Additional Protection: Full Coat or Base Coat Options. Our proprietary plate coating, EncapsalocT, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy.

The strike face of our Spartan Armor Systems. AR550 Body Armor plates proudly bears the mark of our Spartan logo.

IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Blazing The Trail of Innovation. Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature.

This is an industry FIRST! T is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we've developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51.308 Winchester at a rated velocity of 3,100 fps or less. Additionally, we've successfully defeated these threat profiles from Close Quarters Battle (CQB) distances. Configuration: This armor comes as a pair, meaning you will receive both front and back plates.

Shooters Cut Plate Weight (per plate). 10"x12" AR550 Shooters Cut: Base Coat 8lbs 1oz. Or Full Coat 8lbs 10oz. Coating makes this slim profile plate overall. Side Plate Weight (per plate).

6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat). 6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat). AR550 Body Armor - Shooters Cut Specs. Special Threat Tested to Level III+ Standards. Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection. Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple CurveT. Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only. This item is in the category "Sporting Goods\Tactical & Duty Gear\Body Armor & Plates". The seller is "whiskeybeard55" and is located in this country: US. This item can be shipped to United States.

1. Department: Men
2. Model Year: 2019
3. Number of Items in Set: 1
4. Country/Region of Manufacture: United States
5. Number of Straps: 1
6. Model: SPARTAN ARMOR SENTINEL PLATE CARRIER LEVEL III
7. Sport/Activity: Hunting
8. Brand: Spartan
9. Color: Brown
10. Body Area: Chest
11. Type: Plate