New set Full Body Armor Gear Tactical Vest 3 Grade prot. + bulletproof elements

Set of warrior gear protection equipment in olive drab color. Full Body Armor Plate Carrier Vest III Grade protection MOLLE Kevlar included. Hybrid Kevlar bulletproof protection IIIA of protection of limbs and joints (hands and feet). Full Body Armor Plate Carrier MOLLE Vest of III grade protection.

Hard armor plate III Grade protection (USA) - 4 pcs (set of frontal and side plates). Kevlar soft inserts III A (USA) at the all elements of the vest. Hybrid kevlar knee and elbow elements by IIIA class protection. Hybrid kevlar front shin and arm elements by IIIA class protection.

Soft kevlar protection element of back shin elements. Soft kevlar hip protection elements by IIIA class protection with MOLLE platform. This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor. Reference material of the vest. The vest is equipped with MOLLY.

The Corsair M3c vest offers full 3 Grade ballistic protection, including 3A grade the back, chest and sides of the torso, as well as shoulders, neck, and groin. The vests size is adjusted. The front and back of the vest have full-size pockets, exterior to the Kevlar 3A Soft Armor, which are hard armor plate ready. Independent of the exterior pockets for hard armor plates, the entire surface of the vest, neck and shoulder pads, and groin pad are fitted with custom-cut 3A Kevlar ballistic armor. The Kevlar armor is bendable and lightweight making it an ideal choice for balancing protection and maneuverability. The Kevlar armor is enclosed within the water-resistant fabric of the vest making it suitable for all but the wettest of conditions. On the entire surface of the bulletproof vest is outfitted with 25mm belt strapping at an alternating interval of 25mm to comply with the MOLLE (MOLLY) standard, on which items of equipment and ammunition can be attached (pockets and gear). All straps lines MOLLE vest have the same color in the color of the vest. Do not light up in the night and do not stand out in daylight. What makes 100% draining the terrain. Belt tape is manufactured according to TU U 13.2-31778043-115: 2015 on polyamide yarn, has maximum breaking loads. The vest "Corsair M3c" is a modular system and can completely disassemble. Made of a very robust and high-strength quality fabric (high-strength polyamide fabric "SCC-36, " "TPS-12").

1 Kevlar ballistic armor, rated 3A (IIIA) (USA). 2 Hard armor plates 3 Grade protection (USA) - 4 pcs (frontal and sides). 3 Every square inch of stitched material is packed with custom fit Kevlar body armor. 4 The vest front, the vest rear, each side of the vest, the detachable shoulders and 3-piece neck collar, and the groin protector. The vest "Corsair M3c" includes frontal and sides hard armor plates.

The fastening of the left and right axle shafts of the side protection in sides has a double fixation with a textile fastener. Length of side wings adjustable.

From the back on the top of the vest is rigidly fixed the evacuation line. In the side compartments, also and rigid armor plates can be placed. The left and right side elements of the body armor are protected by the MOLLE system from the back, this fastening allows you to adjust the bulletproof vest at the waist. This allows you to wear a vest like in summer on a T-shirt and in winter on a warm volumetric jacket.

The bulletproof vest is equipped with a removable neck (collar) protection, which consists of 3 parts. The groin protection element is fastened with belt strips to the MOLLE slings located on the bottom of the chest cover.

The size is M (Medium) 25x30 cm / 9,84x11.81. On the front side of the vest has 6 rows of MOLLE sling lines, for which you can install all necessary pouches, Mags, pockets for documents, a flashlight, walkie-talkie and other ammunition. Hybrid kevlar knee and elbow elements by 3A class protection.

Complete protection of the joints - knee and elbow pads. These knee and elbow pads are the main advantages over other expensive branded products and not so that they reliably protect your toe joints (knee) and hands on.

Are refractory (as Kevlar can withstand a temperature of about 450 degrees Celsius). Strong as all other knee pads ie, provide protection from shocks, falls, assaults on sharp objects such as valves... Manufacturing technology and protection components make Kevlar knee and elbow pads hybrid armor which in turn is not afraid of moisture, water as a conventional Kevlar.

The use of other materials, provides maximum protection and resistance does not cause the inevitable destruction of the joints at shots from a gun. The maximum impact energy repays bullets. Hybrid kevlar front shin and arm elements by 3A class protection. Shields protect the lower leg feet and.

Protection of hands from the hand of the elbow. Includes protection from shrapnel, bullets and punches. Protects the shin and hand from the sudden impact of hard objects concrete, brick, etc. Or sharp objects (valves, rods).

Protection against high temperatures up to 450 degrees Celsius. Protect your feet from the foot to the knee of Kevlar aramid fiber. The technology of pressing and temperature makes the structure strong. Form of protection, front and side parts of the lower leg is. Replicates the physical design of the leg.

Protection area 1 standard panel of shin elements is 10.9 dm2. Accordingly, the set - 21.8 dm2. Protection area 1 standard panel of hand elements is 6 dm2. Accordingly, the set - 12 dm2. Soft Kevlar ballistic package protects the foot from.

Gunshot injuries on the 2A class protection. Detects and protects against splinter grenades (flying with acceleration) of stones, gravel, glass shards. Temperature lesions up to 450 C degrees Celsius.

Three-dimensional shape (protects the back of the leg from three sides). The use of reliable and practical materials. A Case of durable abrasion-resistant. High-strength quality fabric (high-strength polyamide fabric "SCC-36, " "TPS-12"). B Protective packages are made of multilayer ballistic Kevlar aramid fabric.

Wide textile elastic width 100mm, which fixes the protective bag on the human foot. 40mm wide metal rings used to secure the connection of the front and back panel with soft ballistic package. Soft kevlar hip protection elements by 3A class protection with MOLLE platform. The lap platform covers virtually the entire area of the upper leg man. Molle system provides a convenient location more ammunition, which the modern soldier a huge number and allows you to sometimes relieve the body armor.

Sami platforms do not hamper movement and sit comfortably on foot. Fastening system: The upper platform is provided which is attached to the body armor. On the circumference is fixed in the spirit of the local system of Velcro and fastecs Kevlar ballistic packages are fixed inside on Velcro.

As on photos at the listing. Handing time at last 10 days. This period of time is necessary to clarify all your parameters.

, so that in the end result you were most satisfied with the order and that everything was perfectly suited (fit) to you. If you have further questions or other ideas of a trade, feel free to send me messages! If you have any questions, please ask, do not hesitate. Enjoy your shopping, I still have a lot of other products of military and sporting themes.

The item "New set Full Body Armor Gear Tactical Vest 3 Grade prot. + bulletproof elements" is in sale since Tuesday, October 2, 2018. This item is in the category "Collectibles\Militaria\Current Militaria (2001-Now)\Original Items\Personal, Field Gear\Other Current Field Gear". The seller is "global_military" and is located in Kyiv, default. This item can be shipped worldwide.

Featured Refinements: Vest / Plate Carrier
Colour: Olive drab \ gray
Type: Bode armor vest
Brand: Temp
Modified Item: No
Country/Region of Manufacture: Ukraine
Threat Level Rating: III
Model: Corsair M3c