######xA0; All our armor have been tested by 3rd party independent######xA0;laboratories such as OBL, USA & BMT, Australia according to US NIJ standards. ######xA0; ####x200B;####x200B;####x200B;####x200B;####x200B;####x200B;####x200B;####x200B;####x200B;####x200B;####x200B;####x200B;####x200B;####x200B. MILITECH 10x12&SAPI Sized NIJ III+ 0101.06/NIJ 0101.07 RF2 Alumina Ceramic&PE Hard Armor Plate One Piece(1 PC) Only.
This is Listing For MILITECH's 10x12&SAPI Sized NIJ III+ 0101.06/NIJ 0101.07 RF2 Alumina Ceramic&PE Hard Armor Plate One Piece(1 PC) Only. 10 x 12 Single Curve:######xA0;10" x 12" (Approx######xA0;250 x 300 x 22mm);######xA0; 2.30######xB1;0.05 KG/PC. 10 x 12 Multi Curve:######xA0;10" x 12" (Approx######xA0;250 x 300 x 26mm);######xA0; 2.35######xB1;0.05 KG/PC. Multi Curve SAPI######xA0;Size S:######xA0;8.75'' x 11.75'' (Approx 222 x 298mm x 26mm);######xA0;1.90######xB1;0.05 KG/PC. Multi Curve SAPI######xA0; Size M:######xA0;9.5'' x 12.5'' (Approx 241 x 318mm x 26mm);######xA0;2.20######xB1;0.05 KG/PC.
Multi Curve SAPI Size L:######xA0;10.25'' x 13.25'' (Approx 260 x 337mm x 26mm);######xA0;2.50######xB1;0.05 KG/PC. Multi Curve SAPI Size XL:######xA0;11'' x 14'' (Approx 279 x 356mm x26mm);######xA0;2.95######xB1;0.05 KG/PC. Protection Level:######xA0;######xA0;NIJ III+ 0101.06 & NIJ 0101.07 RF2######xA0;Stand Alone, Good To Resist M80, AK47's 7.62mm x 39mm MSC and SS109 Bullets.
Armor Type:######xA0;Aluminum Oxide(AKA AL2O3) Ceramic & PE Composite Armor. Finishing:######xA0;With Eva Padding Protection Over The Tiles And Sponge Seal To Ensure Comfort Fitting, Wrapped And Sealed With Waterproof Cover In Front And Back. Tested In Official Lab BMT, Australia. M80 7.62 x 51mm FMJ, 147gr, 851.1######xA0;M/S. M43 7.62 x 39mm######xA0;MSC, ######xA0;123gr, ######xA0;736.7 M/S.SS109 5.56 x 45mm, 62gr, 931.3######xA0;M/S. Tested In Official Lab OBL, USA. M80 7.62 x 51mm FMJ, 147gr, 2783 ft/s.
M43 7.62 x 39mm######xA0;MSC, ######xA0;122gr, 2393 ft/s. SS109 5.56 x 45mm, 63gr, 3125######xA0;ft/s.
M193 5.56 x 45mm, 66gr, 3268 ft/s. Level III+ Panel Evaluation & Test Videos. This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor. We guarantee the product you received matches our description above.
####x200B;####x200B;####x200B;####x200B;####x200B;####x200B;####x200B. To best maintain the ballistic helmet & armor plate####x2019;s shelf life and performance, please read below maintenance procedures. When not equipping the helmets, avoid direct exposure under sunlight and all helmets must be stored in a cool, dry place that has good ventilation where away from corrosive materials. When in need of cleaning the ballistic helmets- Use only water damped cloth to wipe off the dirt mark. Do not drop your helmet, the impact can crack the outer paint and resin layer.
Do not carry your helmet by the chin strap. You can damage the strap and liner system. Do not store a wet helmet in a closed box or bag.
Mould and mildew can propagate. Do not leave the helmet in direct sunlight with extreme heat. The condition could weaken the material and the paint itself. Do not use mineral spirits or anything that could remove paints to clean the helmet. Remember NO Product is bulletproof 100%, multiple impacts, especially in the same area will penetrate the material.####x200B;####x200B;####x200B;####x200B;####x200B;####x200B;####x200B;Include but not limited the above maintenance procedures. If it is determined by MILITECH/RAPTOR TACTICAL that the product####x2019;s failure was due to accident, abuse, misuse, neglect, improper maintenance. Exclusion of Consequential Damages####x2014;Purchaser specifically understands and agrees that under no circumstances will MILITECH/RAPTOR TACTICAL be liable to Purchaser for economic, special, incidental, or consequential damages or losses of any kind whatsoever, including but not limited to, loss of anticipated profits and any other loss caused by reason of non-operation of the goods. We understand sometimes things don't work out well, during the "mind change" period, you can return the goods at any time--Even in perfect condition.
Please Refer To Our Listing And Feel Free To######xA0;Contact######xA0;Us If You Have Any Question. All photos shown in the listing are absolutely guaranteed to be taken by us. You will receive the exact item pictured and described always! Thank you very much for paying attention to our terms & conditions, and we look forward to have a smooth business relationship with you.
This is Listing For MILITECH's 10x12&SAPI Sized NIJ III+ 0101.06/NIJ 0101.07 RF2 Alumina Ceramic&PE Hard Armor Plate One Piece(1 PC) Only Weight & Size 10 x 12 Single Curve: 10" x 12" (Approx 250 x 300 x 22mm); 2.30±0.05 KG/PC 10 x 12 Multi Curve: 10" x 12" (Approx 250 x 300 x 26mm); 2.35±0.05 KG/PC Multi Curve SAPI Size S: 8.75'' x 11.75'' (Approx 222 x 298mm x 26mm); 1.90±0.05 KG/PC Multi Curve SAPI Size M: 9.5'' x 12.5'' (Approx 241 x 318mm x 26mm); 2.20±0.05 KG/PC Multi Curve SAPI Size L: 10.25'' x 13.25'' (Approx 260 x 337mm x 26mm); 2.50±0.05 KG/PC Multi Curve SAPI Size XL: 11'' x 14'' (Approx 279 x 356mm x26mm); 2.95±0.05 KG/PC Key Features: Protection Level: NIJ III+ 0101.06 & NIJ 0101.07 RF2 Stand Alone, Good To Resist M80, AK47's 7.62mm x 39mm MSC and SS109 Bullets. Armor Type: Aluminum Oxide(AKA AL2O3) Ceramic & PE Composite Armor Performance: Multi Shot Capability Finishing: With Eva Padding Protection Over The Tiles And Sponge Seal To Ensure Comfort Fitting, Wrapped And Sealed With Waterproof Cover In Front And Back.
The item "MILITECH Bulletproof Plate NIJ III+/NIJ 0101.07RF2 Ballistic Alumina Armor Panel" is in sale since Friday, October 23, 2020. This item is in the category "Sporting Goods\Hunting\Tactical & Duty Gear\Body Armor & Plates". The seller is "mili-tech-express" and is located in Hong Kong. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.